% podman-run(1)

NAME

podman-run - Run a command in a new container

SYNOPSIS

podman run [options] image [command [arg …]]

podman container run [options] image [command [arg …]]

DESCRIPTION

Run a process in a new container. podman run starts a process with its own file system, its own networking, and its own isolated process tree. The IMAGE which starts the process may define defaults related to the process that will be run in the container, the networking to expose, and more, but podman run gives final control to the operator or administrator who starts the container from the image. For that reason podman run has more options than any other podman command.

If the IMAGE is not already loaded then podman run will pull the IMAGE, and all image dependencies, from the repository in the same way running podman pull IMAGE, before it starts the container from that image.

Several files will be automatically created within the container. These include /etc/hosts, /etc/hostname, and /etc/resolv.conf to manage networking. These will be based on the host’s version of the files, though they can be customized with options (for example, –dns will override the host’s DNS servers in the created resolv.conf). Additionally, an empty file is created in each container to indicate to programs they are running in a container. This file is located at /run/.containerenv.

When running from a user defined network namespace, the /etc/netns/NSNAME/resolv.conf will be used if it exists, otherwise /etc/resolv.conf will be used.

OPTIONS

–add-host=host:ip

Add a custom host-to-IP mapping (host:ip)

Add a line to /etc/hosts. The format is hostname:ip. The –add-host option can be set multiple times.

–annotation=key=value

Add an annotation to the container. The format is key=value. The –annotation option can be set multiple times.

–attach, -a=stdio

Attach to STDIN, STDOUT or STDERR.

In foreground mode (the default when -d is not specified), podman run can start the process in the container and attach the console to the process’s standard input, output, and standard error. It can even pretend to be a TTY (this is what most commandline executables expect) and pass along signals. The -a option can be set for each of stdin, stdout, and stderr.

–authfile[=path]

Path of the authentication file. Default is ${XDG_RUNTIME_DIR}/containers/auth.json (Not available for remote commands)

Note: You can also override the default path of the authentication file by setting the REGISTRY_AUTH_FILE environment variable. export REGISTRY_AUTH_FILE=path

–blkio-weight=weight

Block IO weight (relative weight) accepts a weight value between 10 and 1000.

–blkio-weight-device=DEVICE_NAME:WEIGHT

Block IO weight (relative device weight, format: DEVICE_NAME:WEIGHT).

–cap-add=capability

Add Linux capabilities

–cap-drop=capability

Drop Linux capabilities

–cgroupns=mode

Set the cgroup namespace mode for the container, by default host is used. host: use the host’s cgroup namespace inside the container. container:<NAME|ID>: join the namespace of the specified container. private: create a new cgroup namespace. ns:: join the namespace at the specified path.

–cgroups=mode

Determines whether the container will create CGroups. Valid values are enabled and disabled, which the default being enabled. The disabled option will force the container to not create CGroups, and thus conflicts with CGroup options (–cgroupns and –cgroup-parent).

–cgroup-parent=cgroup

Path to cgroups under which the cgroup for the container will be created. If the path is not absolute, the path is considered to be relative to the cgroups path of the init process. Cgroups will be created if they do not already exist.

–cidfile=file

Write the container ID to the file

–conmon-pidfile=file

Write the pid of the conmon process to a file. conmon runs in a separate process than Podman, so this is necessary when using systemd to restart Podman containers.

–cpu-period=limit

Limit the CPU CFS (Completely Fair Scheduler) period

Limit the container’s CPU usage. This flag tell the kernel to restrict the container’s CPU usage to the period you specify.

–cpu-quota=limit

Limit the CPU CFS (Completely Fair Scheduler) quota

Limit the container’s CPU usage. By default, containers run with the full CPU resource. This flag tell the kernel to restrict the container’s CPU usage to the quota you specify.

–cpu-rt-period=microseconds

Limit the CPU real-time period in microseconds

Limit the container’s Real Time CPU usage. This flag tell the kernel to restrict the container’s Real Time CPU usage to the period you specify.

–cpu-rt-runtime=microseconds

Limit the CPU real-time runtime in microseconds

Limit the containers Real Time CPU usage. This flag tells the kernel to limit the amount of time in a given CPU period Real Time tasks may consume. Ex: Period of 1,000,000us and Runtime of 950,000us means that this container could consume 95% of available CPU and leave the remaining 5% to normal priority tasks.

The sum of all runtimes across containers cannot exceed the amount allotted to the parent cgroup.

–cpu-shares=shares

CPU shares (relative weight)

By default, all containers get the same proportion of CPU cycles. This proportion can be modified by changing the container’s CPU share weighting relative to the weighting of all other running containers.

To modify the proportion from the default of 1024, use the –cpu-shares flag to set the weighting to 2 or higher.

The proportion will only apply when CPU-intensive processes are running. When tasks in one container are idle, other containers can use the left-over CPU time. The actual amount of CPU time will vary depending on the number of containers running on the system.

For example, consider three containers, one has a cpu-share of 1024 and two others have a cpu-share setting of 512. When processes in all three containers attempt to use 100% of CPU, the first container would receive 50% of the total CPU time. If you add a fourth container with a cpu-share of 1024, the first container only gets 33% of the CPU. The remaining containers receive 16.5%, 16.5% and 33% of the CPU.

On a multi-core system, the shares of CPU time are distributed over all CPU cores. Even if a container is limited to less than 100% of CPU time, it can use 100% of each individual CPU core.

For example, consider a system with more than three cores. If you start one container {C0} with -c=512 running one process, and another container {C1} with -c=1024 running two processes, this can result in the following division of CPU shares:

PID container CPU CPU share 100 {C0} 0 100% of CPU0 101 {C1} 1 100% of CPU1 102 {C1} 2 100% of CPU2

–cpus=number

Number of CPUs. The default is 0.0 which means no limit.

–cpuset-cpus=number

CPUs in which to allow execution (0-3, 0,1)

–cpuset-mems=nodes

Memory nodes (MEMs) in which to allow execution (0-3, 0,1). Only effective on NUMA systems.

If you have four memory nodes on your system (0-3), use --cpuset-mems=0,1 then processes in your container will only use memory from the first two memory nodes.

–detach, -d=true|false

Detached mode: run the container in the background and print the new container ID. The default is false.

At any time you can run podman ps in the other shell to view a list of the running containers. You can reattach to a detached container with podman attach.

When attached in the tty mode, you can detach from the container (and leave it running) using a configurable key sequence. The default sequence is ctrl-p,ctrl-q. Configure the keys sequence using the –detach-keys option, or specifying it in the libpod.conf file: see libpod.conf(5) for more information.

–detach-keys=sequence

Override the key sequence for detaching a container. Format is a single character [a-Z] or a comma separated sequence of ctrl-<value>, where <value> is one of: a-z, @, ^, [, \\, ], ^ or _.

–device=device

Add a host device to the container. The format is <device-on-host>[:<device-on-container>][:<permissions>] (e.g. –device=/dev/sdc:/dev/xvdc:rwm)

–device-read-bps=path

Limit read rate (bytes per second) from a device (e.g. –device-read-bps=/dev/sda:1mb)

–device-read-iops=path

Limit read rate (IO per second) from a device (e.g. –device-read-iops=/dev/sda:1000)

–device-write-bps=path

Limit write rate (bytes per second) to a device (e.g. –device-write-bps=/dev/sda:1mb)

–device-write-iops=path

Limit write rate (IO per second) to a device (e.g. –device-write-iops=/dev/sda:1000)

–dns=dns

Set custom DNS servers. Invalid if using –dns with –network that is set to ‘none’ or ‘container:<name|id>’.

This option can be used to override the DNS configuration passed to the container. Typically this is necessary when the host DNS configuration is invalid for the container (e.g., 127.0.0.1). When this is the case the –dns flags is necessary for every run.

The special value none can be specified to disable creation of /etc/resolv.conf in the container by Podman. The /etc/resolv.conf file in the image will be used without changes.

–dns-option=option

Set custom DNS options. Invalid if using –dns-option with –network that is set to ‘none’ or ‘container:<name|id>’.

–dns-search=domain

Set custom DNS search domains. Invalid if using –dns-search and –network that is set to ‘none’ or ‘container:<name|id>’. (Use –dns-search=. if you don’t wish to set the search domain)

–entrypoint=”command” | ‘[“command”, “arg1”, …]’

Overwrite the default ENTRYPOINT of the image

This option allows you to overwrite the default entrypoint of the image.

The ENTRYPOINT of an image is similar to a COMMAND because it specifies what executable to run when the container starts, but it is (purposely) more difficult to override. The ENTRYPOINT gives a container its default nature or behavior, so that when you set an ENTRYPOINT you can run the container as if it were that binary, complete with default options, and you can pass in more options via the COMMAND. But, sometimes an operator may want to run something else inside the container, so you can override the default ENTRYPOINT at runtime by using a –entrypoint and a string to specify the new ENTRYPOINT.

You need to specify multi option commands in the form of a json string.

–env, -e=env

Set environment variables

This option allows arbitrary environment variables that are available for the process to be launched inside of the container. If an environment variable is specified without a value, Podman will check the host environment for a value and set the variable only if it is set on the host. If an environment variable ending in * is specified, Podman will search the host environment for variables starting with the prefix and will add those variables to the container. If an environment variable with a trailing ***** is specified, then a value must be supplied.

See Environment note below for precedence and examples.

–env-host=true|false

Use host environment inside of the container. See Environment note below for precedence.

–env-file=file

Read in a line delimited file of environment variables. See Environment note below for precedence.

–expose=port

Expose a port, or a range of ports (e.g. –expose=3300-3310) to set up port redirection on the host system.

–gidmap=container_gid:host_gid:amount

Run the container in a new user namespace using the supplied mapping. This option conflicts with the –userns and –subgidname flags. This option can be passed several times to map different ranges. If calling Podman run as an unprivileged user, the user needs to have the right to use the mapping. See subuid(5). The example maps gids 0-1999 in the container to the gids 30000-31999 on the host. --gidmap=0:30000:2000

–group-add=group

Add additional groups to run as

–health-cmd=”command” | ‘[“command”, “arg1”, …]’

Set or alter a healthcheck command for a container. The command is a command to be executed inside your container that determines your container health. The command is required for other healthcheck options to be applied. A value of none disables existing healthchecks.

Multiple options can be passed in the form of a JSON array; otherwise, the command will be interpreted as an argument to /bin/sh -c.

–health-interval=interval

Set an interval for the healthchecks (a value of disable results in no automatic timer setup) (default “30s”)

–health-retries=retries

The number of retries allowed before a healthcheck is considered to be unhealthy. The default value is 3.

–health-start-period=period

The initialization time needed for a container to bootstrap. The value can be expressed in time format like 2m3s. The default value is 0s

–health-timeout=timeout

The maximum time allowed to complete the healthcheck before an interval is considered failed. Like start-period, the value can be expressed in a time format such as 1m22s. The default value is 30s.

–help

Print usage statement

–hostname=name

Container host name

Sets the container host name that is available inside the container.

–http-proxy=true|false

By default proxy environment variables are passed into the container if set for the Podman process. This can be disabled by setting the --http-proxy option to false. The environment variables passed in include http_proxy, https_proxy, ftp_proxy, no_proxy, and also the upper case versions of those. This option is only needed when the host system must use a proxy but the container should not use any proxy. Proxy environment variables specified for the container in any other way will override the values that would have been passed thru from the host. (Other ways to specify the proxy for the container include passing the values with the --env flag, or hard coding the proxy environment at container build time.)

For example, to disable passing these environment variables from host to container:

--http-proxy=false

Defaults to true

–image-volume, builtin-volume=bind|tmpfs|ignore

Tells Podman how to handle the builtin image volumes.

The options are: bind, tmpfs, or ignore (default bind)

  • bind: A directory is created inside the container state directory and bind mounted into the container for the volumes.
  • tmpfs: The volume is mounted onto the container as a tmpfs, which allows the users to create content that disappears when the container is stopped.
  • ignore: All volumes are just ignored and no action is taken.

–init

Run an init inside the container that forwards signals and reaps processes.

–init-path=path

Path to the container-init binary.

–interactive, -i=true|false

When set to true, keep stdin open even if not attached. The default is false.

–ip6=ip

Not implemented

–ip=ip

Specify a static IP address for the container, for example ‘10.88.64.128’. Can only be used if no additional CNI networks to join were specified via ‘–network=’, and if the container is not joining another container’s network namespace via ‘–network=container:<name|id>’. The address must be within the default CNI network’s pool (default 10.88.0.0/16).

–ipc=ipc

Default is to create a private IPC namespace (POSIX SysV IPC) for the container

  • container:<name|id>: reuses another container shared memory, semaphores and message queues
  • host: use the host shared memory,semaphores and message queues inside the container. Note: the host mode gives the container full access to local shared memory and is therefore considered insecure.
  • ns:<path> path to an IPC namespace to join.

–kernel-memory=number[unit]

Kernel memory limit (format: <number>[<unit>], where unit = b (bytes), k (kilobytes), m (megabytes), or g (gigabytes))

Constrains the kernel memory available to a container. If a limit of 0 is specified (not using --kernel-memory), the container’s kernel memory is not limited. If you specify a limit, it may be rounded up to a multiple of the operating system’s page size and the value can be very large, millions of trillions.

–label, -l=label

Add metadata to a container (e.g., –label com.example.key=value)

–label-file=file

Read in a line delimited file of labels

–link-local-ip=ip

Not implemented

–log-driver=”k8s-file

Logging driver for the container. Currently available options are k8s-file and journald, with json-file aliased to k8s-file for scripting compatibility.

–log-opt=path

Logging driver specific options. Used to set the path to the container log file. For example:

--log-opt path=/var/log/container/mycontainer.json

–mac-address=address

Container MAC address (e.g. 92:d0:c6:0a:29:33)

Remember that the MAC address in an Ethernet network must be unique. The IPv6 link-local address will be based on the device’s MAC address according to RFC4862.

Not currently supported

–memory, -m=limit

Memory limit (format: [], where unit = b (bytes), k (kilobytes), m (megabytes), or g (gigabytes))

Allows you to constrain the memory available to a container. If the host supports swap memory, then the -m memory setting can be larger than physical RAM. If a limit of 0 is specified (not using -m), the container’s memory is not limited. The actual limit may be rounded up to a multiple of the operating system’s page size (the value would be very large, that’s millions of trillions).

–memory-reservation=limit

Memory soft limit (format: [], where unit = b (bytes), k (kilobytes), m (megabytes), or g (gigabytes))

After setting memory reservation, when the system detects memory contention or low memory, containers are forced to restrict their consumption to their reservation. So you should always set the value below –memory, otherwise the hard limit will take precedence. By default, memory reservation will be the same as memory limit.

–memory-swap=limit

A limit value equal to memory plus swap. Must be used with the -m (–memory) flag. The swap LIMIT should always be larger than -m (–memory) value. By default, the swap LIMIT will be set to double the value of –memory.

The format of LIMIT is <number>[<unit>]. Unit can be b (bytes), k (kilobytes), m (megabytes), or g (gigabytes). If you don’t specify a unit, b is used. Set LIMIT to -1 to enable unlimited swap.

–memory-swappiness=number

Tune a container’s memory swappiness behavior. Accepts an integer between 0 and 100.

–mount=type=TYPE,TYPE-SPECIFIC-OPTION[,…]

Attach a filesystem mount to the container

Current supported mount TYPES are bind, volume, and tmpfs.

   e.g.

   type=bind,source=/path/on/host,destination=/path/in/container

   type=bind,src=/path/on/host,dst=/path/in/container,relabel=shared

   type=volume,source=vol1,destination=/path/in/container,ro=true

   type=tmpfs,tmpfs-size=512M,destination=/path/in/container

   Common Options:

      · src, source: mount source spec for bind and volume. Mandatory for bind.

      · dst, destination, target: mount destination spec.

      · ro, read-only: true or false (default).

   Options specific to bind:

      · bind-propagation: shared, slave, private, rshared, rslave, or rprivate(default). See also mount(2).

      . bind-nonrecursive: do not setup a recursive bind mount.  By default it is recursive.

      . relabel: shared, private.

   Options specific to tmpfs:

      · tmpfs-size: Size of the tmpfs mount in bytes. Unlimited by default in Linux.

      · tmpfs-mode: File mode of the tmpfs in octal. (e.g. 700 or 0700.) Defaults to 1777 in Linux.

–name=name

Assign a name to the container

The operator can identify a container in three ways:

  • UUID long identifier (“f78375b1c487e03c9438c729345e54db9d20cfa2ac1fc3494b6eb60872e74778”)
  • UUID short identifier (“f78375b1c487”)
  • Name (“jonah”)

podman generates a UUID for each container, and if a name is not assigned to the container with –name then it will generate a random string name. The name is useful any place you need to identify a container. This works for both background and foreground containers.

–network, –net=node

Set the Network mode for the container. Invalid if using –dns, –dns-option, or –dns-search with –network that is set to ‘none’ or ‘container:<name|id>’.

Valid values are:

  • bridge: create a network stack on the default bridge
  • none: no networking
  • container:<name|id>: reuse another container’s network stack
  • host: use the Podman host network stack. Note: the host mode gives the container full access to local system services such as D-bus and is therefore considered insecure.
  • <network-name>|<network-id>: connect to a user-defined network, multiple networks should be comma separated
  • ns:<path>: path to a network namespace to join
  • slirp4netns: use slirp4netns to create a user network stack. This is the default for rootless containers

–network-alias=alias

Not implemented

–no-hosts=true|false

Do not create /etc/hosts for the container. By default, Podman will manage /etc/hosts, adding the container’s own IP address and any hosts from –add-host. –no-hosts disables this, and the image’s /etc/host will be preserved unmodified. This option conflicts with –add-host.

–oom-kill-disable=true|false

Whether to disable OOM Killer for the container or not.

–oom-score-adj=num

Tune the host’s OOM preferences for containers (accepts -1000 to 1000)

–pid=pid

Set the PID mode for the container

Default is to create a private PID namespace for the container

  • container:<name|id>: join another container’s PID namespace
  • host: use the host’s PID namespace for the container. Note: the host mode gives the container full access to local PID and is therefore considered insecure.
  • ns: join the specified PID namespace

–pids-limit=limit

Tune the container’s pids limit. Set 0 to have unlimited pids for the container. (default “4096” on systems that support PIDS cgroups).

–pod=name

Run container in an existing pod. If you want Podman to make the pod for you, preference the pod name with new:. To make a pod with more granular options, use the podman pod create command before creating a container. If a container is run with a pod, and the pod has an infra-container, the infra-container will be started before the container is.

–privileged=true|false

Give extended privileges to this container. The default is false.

By default, Podman containers are “unprivileged” (=false) and cannot, for example, modify parts of the kernel. This is because by default a container is not allowed to access any devices. A “privileged” container is given access to all devices.

When the operator executes podman run –privileged, Podman enables access to all devices on the host, turns off graphdriver mount options, as well as turning off most of the security measures protecting the host from the container.

–publish, -p=port

Publish a container’s port, or range of ports, to the host

Format: ip:hostPort:containerPort | ip::containerPort | hostPort:containerPort | containerPort

Both hostPort and containerPort can be specified as a range of ports.

When specifying ranges for both, the number of container ports in the range must match the number of host ports in the range. (e.g., podman run -p 1234-1236:1222-1224 --name thisWorks -t busybox but not podman run -p 1230-1236:1230-1240 --name RangeContainerPortsBiggerThanRangeHostPorts -t busybox)

With ip: podman run -p 127.0.0.1:$HOSTPORT:$CONTAINERPORT --name CONTAINER -t someimage

Use podman port to see the actual mapping: podman port CONTAINER $CONTAINERPORT

–publish-all, -P=true|false

Publish all exposed ports to random ports on the host interfaces. The default is false.

When set to true publish all exposed ports to the host interfaces. The default is false. If the operator uses -P (or -p) then Podman will make the exposed port accessible on the host and the ports will be available to any client that can reach the host.

When using -P, Podman will bind any exposed port to a random port on the host within an ephemeral port range defined by /proc/sys/net/ipv4/ip_local_port_range. To find the mapping between the host ports and the exposed ports, use podman port.

–pull=missing

Pull image before running (“always”|”missing”|”never”) (default “missing”). ‘missing’: default value, attempt to pull the latest image from the registries listed in registries.conf if a local image does not exist.Raise an error if the image is not in any listed registry and is not present locally. ‘always’: Pull the image from the first registry it is found in as listed in registries.conf. Raise an error if not found in the registries, even if the image is present locally. ‘never’: do not pull the image from the registry, use only the local version. Raise an error if the image is not present locally.

Defaults to missing.

–quiet, -q

Suppress output information when pulling images

–read-only=true|false

Mount the container’s root filesystem as read only.

By default a container will have its root filesystem writable allowing processes to write files anywhere. By specifying the --read-only flag the container will have its root filesystem mounted as read only prohibiting any writes.

–read-only-tmpfs=true|false

If container is running in –read-only mode, then mount a read-write tmpfs on /run, /tmp, and /var/tmp. The default is true

–restart=policy

Restart policy to follow when containers exit. Restart policy will not take effect if a container is stopped via the podman kill or podman stop commands.

Valid values are:

  • no : Do not restart containers on exit
  • on-failure[:max_retries] : Restart containers when they exit with a non-0 exit code, retrying indefinitely or until the optional max_retries count is hit
  • always : Restart containers when they exit, regardless of status, retrying indefinitely

Please note that restart will not restart containers after a system reboot. If this functionality is required in your environment, you can invoke Podman from a systemd unit file, or create an init script for whichever init system is in use. To generate systemd unit files, please see podman generate systemd

–rm=true|false

Automatically remove the container when it exits. The default is false.

Note that the container will not be removed when it could not be created or started successfully. This allows the user to inspect the container after failure.

–rootfs

If specified, the first argument refers to an exploded container on the file system.

This is useful to run a container without requiring any image management, the rootfs of the container is assumed to be managed externally.

Note: On SELinux systems, the rootfs needs the correct label, which is by default unconfined_u:object_r:container_file_t.

–security-opt=option

Security Options

  • apparmor=unconfined : Turn off apparmor confinement for the container
  • apparmor=your-profile : Set the apparmor confinement profile for the container
  • label=user:USER : Set the label user for the container processes
  • label=role:ROLE : Set the label role for the container processes
  • label=type:TYPE : Set the label process type for the container processes
  • label=level:LEVEL : Set the label level for the container processes
  • label=filetype:TYPE : Set the label file type for the container files
  • label=disable : Turn off label separation for the container
  • no-new-privileges : Disable container processes from gaining additional privileges
  • seccomp=unconfined : Turn off seccomp confinement for the container
  • seccomp=profile.json : White listed syscalls seccomp Json file to be used as a seccomp filter

Note: Labeling can be disabled for all containers by setting label=false in the libpod.conf (/etc/containers/libpod.conf) file.

–shm-size=size

Size of /dev/shm (format: [], where unit = b (bytes), k (kilobytes), m (megabytes), or g (gigabytes)) If you omit the unit, the system uses bytes. If you omit the size entirely, the system uses 64m. When size is 0, there is no limit on the amount of memory used for IPC by the container.

–sig-proxy=true|false

Proxy signals sent to the podman run command to the container process. SIGCHLD, SIGSTOP, and SIGKILL are not proxied. The default is true.

–stop-signal=SIGTERM

Signal to stop a container. Default is SIGTERM.

–stop-timeout=seconds

Timeout (in seconds) to stop a container. Default is 10.

–subgidname=name

Run the container in a new user namespace using the map with ‘name’ in the /etc/subgid file. If calling Podman run as an unprivileged user, the user needs to have the right to use the mapping. See subgid(5). This flag conflicts with --userns and --gidmap.

–subuidname=name

Run the container in a new user namespace using the map with ‘name’ in the /etc/subuid file. If calling Podman run as an unprivileged user, the user needs to have the right to use the mapping. See subuid(5). This flag conflicts with --userns and --uidmap.

–sysctl=SYSCTL

Configure namespaced kernel parameters at runtime

IPC Namespace - current sysctls allowed:

  • kernel.msgmax
  • kernel.msgmnb
  • kernel.msgmni
  • kernel.sem
  • kernel.shmall
  • kernel.shmmax
  • kernel.shmmni
  • kernel.shm_rmid_forced
  • Sysctls beginning with fs.mqueue.*

Note: if you use the --ipc=host option these sysctls will not be allowed.

Network Namespace - current sysctls allowed:

  • Sysctls beginning with net.*

Note: if you use the --network=host option these sysctls will not be allowed.

–systemd=true|false|always

Run container in systemd mode. The default is true.

The value always enforces the systemd mode is enforced without looking at the executable name. Otherwise, if set to true and the command you are running inside the container is systemd, /usr/sbin/init or /sbin/init.

If the command you are running inside of the container is systemd Podman will setup tmpfs mount points in the following directories:

/run, /run/lock, /tmp, /sys/fs/cgroup/systemd, /var/lib/journal

It will also set the default stop signal to SIGRTMIN+3.

This allows systemd to run in a confined container without any modifications.

Note: On SELinux systems, systemd attempts to write to the cgroup file system. Containers writing to the cgroup file system are denied by default. The container_manage_cgroup boolean must be enabled for this to be allowed on an SELinux separated system.

setsebool -P container_manage_cgroup true

–tmpfs=fs

Create a tmpfs mount

Mount a temporary filesystem (tmpfs) mount into a container, for example:

$ podman run -d –tmpfs /tmp:rw,size=787448k,mode=1777 my_image

This command mounts a tmpfs at /tmp within the container. The supported mount options are the same as the Linux default mount flags. If you do not specify any options, the systems uses the following options: rw,noexec,nosuid,nodev.

–tty, -t=true|false

Allocate a pseudo-TTY. The default is false.

When set to true Podman will allocate a pseudo-tty and attach to the standard input of the container. This can be used, for example, to run a throwaway interactive shell. The default is false.

NOTE: The -t option is incompatible with a redirection of the Podman client standard input.

–uidmap=container_uid:host_uid:amount

Run the container in a new user namespace using the supplied mapping. This option conflicts with the –userns and –subuidname flags. This option can be passed several times to map different ranges. If calling Podman run as an unprivileged user, the user needs to have the right to use the mapping. See subuid(5). The example maps uids 0-1999 in the container to the uids 30000-31999 on the host. --uidmap=0:30000:2000

–ulimit=option

Ulimit options

You can pass host to copy the current configuration from the host.

–user, -u=user

Sets the username or UID used and optionally the groupname or GID for the specified command.

The followings examples are all valid: –user [user | user:group | uid | uid:gid | user:gid | uid:group ]

Without this argument the command will be run as root in the container.

–userns=host –userns=keep-id –userns=container:container –userns=ns:my_namespace

Set the user namespace mode for the container. It defaults to the PODMAN_USERNS environment variable. An empty value means user namespaces are disabled.

  • host: run in the user namespace of the caller. This is the default if no user namespace options are set. The processes running in the container will have the same privileges on the host as any other process launched by the calling user.
  • keep-id: creates a user namespace where the current rootless user’s UID:GID are mapped to the same values in the container. This option is ignored for containers created by the root user.
  • ns: run the container in the given existing user namespace.
  • container: join the user namespace of the specified container.

This option is incompatible with –gidmap, –uidmap, –subuid and –subgid

–uts=host

Set the UTS mode for the container

  • host: use the host’s UTS namespace inside the container.
  • ns: specify the user namespace to use.

NOTE: the host mode gives the container access to changing the host’s hostname and is therefore considered insecure.

–volume, -v[=[[SOURCE-VOLUME|HOST-DIR:]CONTAINER-DIR[:OPTIONS]]]

Create a bind mount. If you specify, -v /HOST-DIR:/CONTAINER-DIR, Podman bind mounts /HOST-DIR in the host to /CONTAINER-DIR in the Podman container. Similarly, -v VOLUME-NAME:/CONTAINER-DIR will mount the volume in the host to the container. If no such named volume exists, Podman will create one.

The OPTIONS are a comma delimited list and can be:

  • [rw|ro]
  • [z|Z]
  • [[r]shared|[r]slave|[r]private]

The CONTAINER-DIR must be an absolute path such as /src/docs. The volume will be mounted into the container at this directory.

Volumes may specify a source as well, as either a directory on the host or the name of a named volume. If no source is given, the volume will be created as an anonymous named volume with a randomly generated name, and will be removed when the container is removed via the --rm flag or podman rm --volumes.

If a volume source is specified, it must be a path on the host or the name of a named volume. Host paths are allowed to be absolute or relative; relative paths are resolved relative to the directory Podman is run in. Any source that does not begin with a . or / it will be treated as the name of a named volume. If a volume with that name does not exist, it will be created. Volumes created with names are not anonymous and are not removed by --rm and podman rm --volumes.

You can specify multiple -v options to mount one or more volumes into a container.

You can add :ro or :rw suffix to a volume to mount it read-only or read-write mode, respectively. By default, the volumes are mounted read-write. See examples.

Labeling systems like SELinux require that proper labels are placed on volume content mounted into a container. Without a label, the security system might prevent the processes running inside the container from using the content. By default, Podman does not change the labels set by the OS.

To change a label in the container context, you can add either of two suffixes :z or :Z to the volume mount. These suffixes tell Podman to relabel file objects on the shared volumes. The z option tells Podman that two containers share the volume content. As a result, Podman labels the content with a shared content label. Shared volume labels allow all containers to read/write content. The Z option tells Podman to label the content with a private unshared label. Only the current container can use a private volume.

By default bind mounted volumes are private. That means any mounts done inside container will not be visible on host and vice versa. One can change this behavior by specifying a volume mount propagation property. Making a volume shared mounts done under that volume inside container will be visible on host and vice versa. Making a volume slave enables only one way mount propagation and that is mounts done on host under that volume will be visible inside container but not the other way around.

To control mount propagation property of volume one can use :[r]shared, :[r]slave or :[r]private propagation flag. Propagation property can be specified only for bind mounted volumes and not for internal volumes or named volumes. For mount propagation to work source mount point (mount point where source dir is mounted on) has to have right propagation properties. For shared volumes, source mount point has to be shared. And for slave volumes, source mount has to be either shared or slave.

Use df <source-dir> to figure out the source mount and then use findmnt -o TARGET,PROPAGATION <source-mount-dir> to figure out propagation properties of source mount. If findmnt utility is not available, then one can look at mount entry for source mount point in /proc/self/mountinfo. Look at optional fields and see if any propagation properties are specified. shared:X means mount is shared, master:X means mount is slave and if nothing is there that means mount is private.

To change propagation properties of a mount point use mount command. For example, if one wants to bind mount source directory /foo one can do mount --bind /foo /foo and mount --make-private --make-shared /foo. This will convert /foo into a shared mount point. Alternatively one can directly change propagation properties of source mount. Say / is source mount for /foo, then use mount --make-shared / to convert / into a shared mount.

–volumes-from[=CONTAINER[:OPTIONS]]

Mount volumes from the specified container(s). OPTIONS is a comma delimited list with the following available elements:

  • [rw|ro]
  • z

Mounts already mounted volumes from a source container onto another container. You must supply the source’s container-id or container-name. To share a volume, use the –volumes-from option when running the target container. You can share volumes even if the source container is not running.

By default, Podman mounts the volumes in the same mode (read-write or read-only) as it is mounted in the source container. Optionally, you can change this by suffixing the container-id with either the ro or rw keyword.

Labeling systems like SELinux require that proper labels are placed on volume content mounted into a container. Without a label, the security system might prevent the processes running inside the container from using the content. By default, Podman does not change the labels set by the OS.

To change a label in the container context, you can add z to the volume mount. This suffix tells Podman to relabel file objects on the shared volumes. The z option tells Podman that two containers share the volume content. As a result, podman labels the content with a shared content label. Shared volume labels allow all containers to read/write content.

If the location of the volume from the source container overlaps with data residing on a target container, then the volume hides that data on the target.

–workdir, -w=dir

Working directory inside the container

The default working directory for running binaries within a container is the root directory (/). The image developer can set a different default with the WORKDIR instruction. The operator can override the working directory by using the -w option.

Exit Status

The exit code from podman run gives information about why the container failed to run or why it exited. When podman run exits with a non-zero code, the exit codes follow the chroot standard, see below:

125 if the error is with Podman itself

$ podman run --foo busybox; echo $?
Error: unknown flag: --foo
125

126 if the contained command cannot be invoked

$ podman run busybox /etc; echo $?
Error: container_linux.go:346: starting container process caused "exec: \"/etc\": permission denied": OCI runtime error
126

127 if the contained command cannot be found

$ podman run busybox foo; echo $?
Error: container_linux.go:346: starting container process caused "exec: \"foo\": executable file not found in $PATH": OCI runtime error
127

Exit code of contained command otherwise

$ podman run busybox /bin/sh -c 'exit 3'
3

EXAMPLES

Running container in read-only mode

During container image development, containers often need to write to the image content. Installing packages into /usr, for example. In production, applications seldom need to write to the image. Container applications write to volumes if they need to write to file systems at all. Applications can be made more secure by running them in read-only mode using the –read-only switch. This protects the containers image from modification. Read only containers may still need to write temporary data. The best way to handle this is to mount tmpfs directories on /run and /tmp.

$ podman run --read-only -i -t fedora /bin/bash
$ podman run --read-only --read-only-tmpfs=false --tmpfs /run -i -t fedora /bin/bash

Exposing log messages from the container to the host’s log

If you want messages that are logged in your container to show up in the host’s syslog/journal then you should bind mount the /dev/log directory as follows.

$ podman run -v /dev/log:/dev/log -i -t fedora /bin/bash

From inside the container you can test this by sending a message to the log.

(bash)# logger "Hello from my container"

Then exit and check the journal.

(bash)# exit

$ journalctl -b | grep Hello

This should list the message sent to logger.

Attaching to one or more from STDIN, STDOUT, STDERR

If you do not specify -a then Podman will attach everything (stdin,stdout,stderr). You can specify to which of the three standard streams (stdin, stdout, stderr) you’d like to connect instead, as in:

$ podman run -a stdin -a stdout -i -t fedora /bin/bash

Sharing IPC between containers

Using shm_server.c available here: https://www.cs.cf.ac.uk/Dave/C/node27.html

Testing --ipc=host mode:

Host shows a shared memory segment with 7 pids attached, happens to be from httpd:

$ sudo ipcs -m

------ Shared Memory Segments --------
key        shmid      owner      perms      bytes      nattch     status
0x01128e25 0          root       600        1000       7

Now run a regular container, and it correctly does NOT see the shared memory segment from the host:

$ podman run -it shm ipcs -m

------ Shared Memory Segments --------
key        shmid      owner      perms      bytes      nattch     status

Run a container with the new --ipc=host option, and it now sees the shared memory segment from the host httpd:

$ podman run -it --ipc=host shm ipcs -m

------ Shared Memory Segments --------
key        shmid      owner      perms      bytes      nattch     status
0x01128e25 0          root       600        1000       7

Testing --ipc=container:CONTAINERID mode:

Start a container with a program to create a shared memory segment:

$ podman run -it shm bash
$ sudo shm/shm_server &
$ sudo ipcs -m

------ Shared Memory Segments --------
key        shmid      owner      perms      bytes      nattch     status
0x0000162e 0          root       666        27         1

Create a 2nd container correctly shows no shared memory segment from 1st container:

$ podman run shm ipcs -m

------ Shared Memory Segments --------
key        shmid      owner      perms      bytes      nattch     status

Create a 3rd container using the new –ipc=container:CONTAINERID option, now it shows the shared memory segment from the first:

$ podman run -it --ipc=container:ed735b2264ac shm ipcs -m
$ sudo ipcs -m

------ Shared Memory Segments --------
key        shmid      owner      perms      bytes      nattch     status
0x0000162e 0          root       666        27         1

Mapping Ports for External Usage

The exposed port of an application can be mapped to a host port using the -p flag. For example, an httpd port 80 can be mapped to the host port 8080 using the following:

$ podman run -p 8080:80 -d -i -t fedora/httpd

Mounting External Volumes

To mount a host directory as a container volume, specify the absolute path to the directory and the absolute path for the container directory separated by a colon. If the source is a named volume maintained by Podman, it’s recommended to use it’s name rather than the path to the volume. Otherwise the volume will be considered as an orphan and wiped if you execute podman volume prune:

$ podman run -v /var/db:/data1 -i -t fedora bash

$ podman run -v data:/data2 -i -t fedora bash

Using –mount flags, To mount a host directory as a container folder, specify the absolute path to the directory or the volume name, and the absolute path within the container directory:

$ podman run --mount type=bind,src=/var/db,target=/data1 busybox sh

$ podman run --mount type=bind,src=volume-name,target=/data1 busybox sh

When using SELinux, be aware that the host has no knowledge of container SELinux policy. Therefore, in the above example, if SELinux policy is enforced, the /var/db directory is not writable to the container. A “Permission Denied” message will occur and an avc: message in the host’s syslog.

To work around this, at time of writing this man page, the following command needs to be run in order for the proper SELinux policy type label to be attached to the host directory:

$ chcon -Rt svirt_sandbox_file_t /var/db

Now, writing to the /data1 volume in the container will be allowed and the changes will also be reflected on the host in /var/db.

Using alternative security labeling

You can override the default labeling scheme for each container by specifying the --security-opt flag. For example, you can specify the MCS/MLS level, a requirement for MLS systems. Specifying the level in the following command allows you to share the same content between containers.

podman run --security-opt label=level:s0:c100,c200 -i -t fedora bash

An MLS example might be:

$ podman run --security-opt label=level:TopSecret -i -t rhel7 bash

To disable the security labeling for this container versus running with the --permissive flag, use the following command:

$ podman run --security-opt label=disable -i -t fedora bash

If you want a tighter security policy on the processes within a container, you can specify an alternate type for the container. You could run a container that is only allowed to listen on Apache ports by executing the following command:

$ podman run --security-opt label=type:svirt_apache_t -i -t centos bash

Note:

You would have to write policy defining a svirt_apache_t type.

Setting device weight

If you want to set /dev/sda device weight to 200, you can specify the device weight by --blkio-weight-device flag. Use the following command:

$ podman run -it --blkio-weight-device "/dev/sda:200" ubuntu

Setting Namespaced Kernel Parameters (Sysctls)

The --sysctl sets namespaced kernel parameters (sysctls) in the container. For example, to turn on IP forwarding in the containers network namespace, run this command:

$ podman run --sysctl net.ipv4.ip_forward=1 someimage

Note:

Not all sysctls are namespaced. Podman does not support changing sysctls inside of a container that also modify the host system. As the kernel evolves we expect to see more sysctls become namespaced.

See the definition of the --sysctl option above for the current list of supported sysctls.

Set UID/GID mapping in a new user namespace

Running a container in a new user namespace requires a mapping of the uids and gids from the host.

$ podman run --uidmap 0:30000:7000 --gidmap 0:30000:7000 fedora echo hello

Configuring Storage Options from the command line

Podman allows for the configuration of storage by changing the values in the /etc/container/storage.conf or by using global options. This shows how to setup and use fuse-overlayfs for a one time run of busybox using global options.

podman –log-level=debug –storage-driver overlay –storage-opt “overlay.mount_program=/usr/bin/fuse-overlayfs” run busybox /bin/sh

Rootless Containers

Podman runs as a non root user on most systems. This feature requires that a new enough version of shadow-utils be installed. The shadow-utils package must include the newuidmap and newgidmap executables.

Note: RHEL7 and Centos 7 will not have this feature until RHEL7.7 is released.

In order for users to run rootless, there must be an entry for their username in /etc/subuid and /etc/subgid which lists the UIDs for their user namespace.

Rootless Podman works better if the fuse-overlayfs and slirp4netns packages are installed. The fuse-overlay package provides a userspace overlay storage driver, otherwise users need to use the vfs storage driver, which is diskspace expensive and does not perform well. slirp4netns is required for VPN, without it containers need to be run with the –net=host flag.

ENVIRONMENT

Environment variables within containers can be set using multiple different options: This section describes the precedence.

Precedence Order:

   **--env-host** : Host environment of the process executing Podman is added.

   Container image : Any environment variables specified in the container image.

   **--env-file** : Any environment variables specified via env-files.  If multiple files specified, then they override each other in order of entry.

   **--env** : Any environment variables specified will override previous settings.

Run containers and set the environment ending with a * and a *****

$ export ENV1=a
$ $ podman run --env ENV* alpine printenv ENV1
a

$ podman run --env ENV*****=b alpine printenv ENV*****
b

FILES

/etc/subuid /etc/subgid

SEE ALSO

subgid(5), subuid(5), libpod.conf(5), systemd.unit(5), setsebool(8), slirp4netns(1), fuse-overlayfs(1)

HISTORY

September 2018, updated by Kunal Kushwaha kushwaha_kunal_v7@lab.ntt.co.jp

October 2017, converted from Docker documentation to Podman by Dan Walsh for Podman dwalsh@redhat.com

November 2015, updated by Sally O’Malley somalley@redhat.com

July 2014, updated by Sven Dowideit SvenDowideit@home.org.au

June 2014, updated by Sven Dowideit SvenDowideit@home.org.au

April 2014, Originally compiled by William Henry whenry@redhat.com based on docker.com source material and internal work.